48
Symptom
Check this
Solution
Noise is heard when the seat is
started.
Seat movement is slow.
It is caused by cold lubricant oil inside. It
does not influence the product function
and will cease shortly. If it continues after a
while, stop using the seat and contact your
local Takara Belmont dealer for advice.
It is caused by cold lubricant oil inside.
Normal operation will be restored if the
room temperature rises or if the product is
operated for a while. If the seat movement
remains abnormal, stop using it and
contact your local Takara Belmont dealer
for advice.
Before Requesting Repairs
Daily Inspections
Rattling may cause incorrect operation or damage in
the main body, or cause it to fall over. Stop using the
product.
Turn the power switch off, and turn the power on again
after 5 seconds. If the warning sound continues to be
emitted, there may be a malfunction in the position
detector. Stop using the product, and turn the power
switch off.
Follow the procedures outlined in "How to set the
preset position" [page 27] to change the preset position
and operate the seat. If the seat still does not operate
properly, stop using the product and turn the power
switch off.
Customers may not be able to get on or off the seat
safely. If the seat does not operate properly, stop using
the product and turn the power switch off.
Customers may not be able to get on or off the seat
safely. If the seat does not operate properly, stop using
the product and turn the power switch off.
If there is rattle or abnormal noise when the seat is
operating, stop using the product.
Does the basin,
backrest or seat
rattle?
Is the seat operating
properly?
Slowly push the rear end of the
basin, top of the backrest or the
front end of the seat in each
direction, and check whether they
rattle.
Turn the power switch on and
check that a warning sound is not
emitted intermittently.
Check that the seat moves properly
to the position set by the preset
function.
Check that the seat returns
properly to the initial position using
the automatic return function.
Check that the Seat lifting switch or
Seat lowering switch lifts or lowers
the seat.
Check that there is no rattle or
abnormal noise when the seat is
operating.
Inspect item
Inspection method
If the inspection results show defects
Inspect the product every day
Conduct the check below for safe use of the product.
Be sure to conduct the daily inspection according to the following table.
If you use this product without conducting the daily inspection, you or another person
may be injured or this product or a peripheral device may break.
Warning
