39
Maintenance
Conduct the after-use care and always keep this product clean for later use.
The untreated stains may cause mold.
Conduct dry wiping using a soft, dry cloth.
leather component, Resin component
For severe stains
Wipe using a soft cloth dipped in neutral detergent diluted ten times with water, then wipe
with water, then wipe with a dry cloth thoroughly.
Operational component, Metallic component
Wipe dry using a soft, dry cloth.
Do not conduct water wiping because the device hates humidity or water. When water is
splashed, promptly wipe off. It may cause failure of the electrical components.
When restarting the use of this product after not using for a certain period, clean before using.
After cleaning, be sure to confirm normal operation of this product.
Maintenance of various components
- Never use the following substances:
The volatile chemicals, such as thinner, alcohol, remover, gasoline, and kerosene, acid, alkaline or
chloric detergents, antiseptic solution strongly corrosive to metals (povidone iodine [isodine solu-
tion], sodium hypochlorite, etc.), waxes containing abrading agent, sponges containing abrading
agent, etc.
- Do not use brushes, scrubbers, etc., for maintenance. It may leave scratches or stains.
However, they can be used as an exception in the following cases.
* Use of the teeth brush on the watering plate and foam nozzle [pages 42 and 43]
* Use of melamine sponge on the ceramic part inside the basin [page 40]
- Do not use detergents that contain organic solvent or abrading agent, breaching agent, etc., for
cleaning the leather components.
The surfaces may deteriorate, and the quality and gloss may change.
The metallic parts or mechanical structure of this product has sharp edges. Pay atten-
tion to avoid hurting the hands or fingers when cleaning.
Caution
- Turn off the power switch and pull off the power plug when conducting mainte-
nance. There is a risk of electrical shock or ignition. Furthermore, an unexpected
action of this product may cause an injury.
- Do not splash water for washing. There is a risk of failure or electrical shock.
Warning
