69
Chapter 6 Setting the Machine
6
Settings for the machine, such as those for the embroidery frame or those on how the machine is to be
used, are explained in the following.
Please refer to this chapter for the convenient settings, such as if you would like to adjust the settings of
the network and frame movement, or change the wallpaper of the operation panel.
The chart below shows how the embroidery parameters are originally set.
These settings can be changed as necessary.
Displaying the Embroidery Setting screen
1.
Tap
on the Home screen.
The Setting screen is displayed.
2.
Tap .
The Embroidery Setting screen is displayed.
Chapter 6 Setting the Machine
6.1 Adjusting the embroidery settings
Function
Details
Setting
Default
setting
Thread Detection
Detects any breakage in the upper/under thread.
YES/NO
YES
Return stitches
Determines whether to sew return stitches at the start of
embroidery.
YES/NO
YES
Length of upper thread to
remain after trimming
thread
Length of upper thread to remain after thread is trimmed
Long/Middle/
Short
Middle
Return to marker position
Whether to move the needle bar case to the position of
the laser crosshair marker when the embroidery is
finished
YES/NO
YES
Jump code
Conditions governing thread trimming partway through a
design
[1J] to [9J]
3J
