87
Chapter 7 Using Optional Accessories
7
2.
Loosely screw in the knobbed screws
(two places, at right and left) at the
lower part of the frame drive system.
3.
Position the center, cylindrical part of the cap
frame unit onto the ring shaft, and slide the cap
frame unit in, along the ring shaft.
4.
On the connecting part of the cap frame
unit there are two slits (at right and left).
Slide in the cap frame unit until these two
slits are engaged by the two knobbed
screws, and until the unit cannot be
pushed in any further.
5.
Tighten the knobbed screws (two places, at right and left) that were attached in
step 2.
If the interconnecting portion of the cap
frame unit is difficult to push in when
attaching the cap frame unit for the first time,
try loosening the fastening screw of the
revolving ring and adjusting the position.
