89
Chapter 7 Using Optional Accessories
7
4.
Remove the fastening band from the cap frame,
and place the backing on the surface of the
holder of the cap frame.
5.
Pull out the sweatband from the cap so it is on
the outside.
6.
Position the visor of the cap so it faces
directly upwards, and insert the sweatband
under the holder on the cap frame.
Push the cap in until the visor reaches the forward
edge of the holder.
Also, adjust the positioning of the cap so that the
center of its visor is aligned with the guide line.
7.
Position the fastening band along the base of
the cap's visor, then fasten it with the latches.
If the fastening band is loose, or too tight, and the cap
cannot be held in place using the latch, adjust the
position of the latch holder.
1
2
