9
Important Safety Instructions
If the machine is dropped, damaged, or fails to function properly
Immediately stop use of the machine and contact your sales dealer.
When air conditioning devices are used
Take care so as not to allow the airflow from an air conditioning device to
directly strike the machine. This will help prevent irregularities in the
embroidery threads.
When moving the machine
When moving the machine, make sure to enlist the help of at least other
persons, and grasp it at the specified locations on the bottom. Move it
carefully while paying attention to the surroundings.
When installing the machine
Place the machine on a flat, level table or other stable surface before
using it. Make sure to allow sufficient space, at least 20 cm, at the right
and left sides of the machine, and between it and any walls or other
obstructions, so the movement of the frame is not blocked.
Observation and supervision required in the following cases
A supervisor should be on hand to provide guidance when the machine is
to be used by persons with disabilities, persons who lack the knowledge
and experience to operate a machine properly, or children. Also, children
should be supervised to ensure that they do not play with the machine. If
using USB memory (USB flash drives), due care should be taken if
children are present in order to prevent ingestion.
Use fingers or stylus for operation panel
Operations using the operation panel can be performed using fingers or
the supplied stylus.
Maintenance for the machine is important
Be sure to oil the specified places and perform the necessary cleaning at
the specified intervals.
