Tait TB9100, Инструкция по установке и эксплуатации

Страница: 63 / 144

TB9100 Installation and Operation Manual Base Station Operation 63
© Tait Electronics Limited May 2006
Microphone
Channel Button and
LED
The left microphone channel button selects the speech mode for the
microphone transmission. The associated microphone channel LED
indicates the type of speech mode. Refer to
“Microphone Operation” on
page 68 for more information.
Reciter
The reciter indicator LEDs are located on the front and on the rear.
Front View
The indicator LEDs on the front are visible through a slot in the front panel.
These LEDs provide the following information about the state of the reciter:
■
steady green - the reciter is powered up
■
flashing red - one or more alarms have been generated; you can use the
CSS to find out more details about the alarms.
LED
behaviour
Description
On (steady) Base station is in standby mode (regardless of the presence of other
faults)
Flash Base station is in run mode, and one or more faults are present
Off Base station is in run mode, and no faults are present
Figure 5.2 Indicator LEDs on the front of the reciter
b indicator LEDs c hex switch (for future use)
c
b