TACKLIFE TLSS01A, Руководство пользователя

Страница: 12 / 35

6. Technical data
Mains voltage ............................ .....120 V/60 Hz
Power input....... .......................... ...80 Watt (S1*)
.......................................................120 Watt (S6 30%**)
Stroke rate...................................370-1440 min-1
Protection type
.................................. ...P 20
Stroke..........................................12 mm
Rotate of Flexible Driver............. 2400-4500rpm
Base area....................................630 x 295 mm
Tilting range of table.....................0° bis 45° nach links
Table size.....................................415 x 255 mm
Length of saw blade approx.........134 mm
Reach..........................................406 mm
Max. cutting height at 90°............50 mm
Max. cutting height at 45°............22 mm
Minimum size work piece w x h....100 x 22 mm
Maximum size work piece w x h...400 x 50 mm
Weight.........................................13.2 kg
*Operating mode S1:
Continuous operation at constant load
**Operating mode S6 30%:
Continuous operation with idling (cycle time 10 minutes). To ensure that the motor does not become
excessively hot, it may only be operated for 30% of the cycle at the specified rating and must then be
allowed to idle for 70% of the cycle.
Noise emission values Sound
Sound values were measured in accordance with EN 61029.
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Sound pressure level LpA................................................................................................... 66,9 dB(A)
Uncertainty KpA........................................................................................................................3 dB(A)
Sound power level LWA.......................................................................................................79,9 dB(A)
Uncertainty KWA.......................................................................................................................3 dB(A)
The quoted values are emission values and not necessarily reli- able workplace values. Although there
is a correlation between emission and imission levels it is impossible to draw any certain conclusions
as to the need for additional precautions.
Factors with a potential influence on the actual immission level at the workplace include the duration of
impact, the type of room, and other sources of noise etc., e. g. the number of ma- chines and other
neighbouring operations.
Reliable workplace values may also vary from country to coun- try. With this information the user
should at least be able to make a better assessment of the dangers and risks involved.
Limit the noise level to a minimum!

Use only equipment that is in perfect condition.

Maintain and clean the equipment regularly.