WARNING!
When adjusting the multi-purposed saw, you can only hold the foot plate as shown in Fig.B1. Never hold the
pivot head as shown in Fig. B2, B3.
WARNING!
To avoid being pinched, keep hands away from the hinge when changing positions.
To avoid the multi-purposed saw being turned on accidentally, remove the battery pack from the saw.
Before operation, make sure the pivot release lever is locked into position.
2. Inserting / removing the saw blade
WARNING! Before any work on the saw itself, remove the battery pack.
The blade should extend past both the foot plate and the thickness of the workpiece during the cut. Select the blade
best suitable for the material to be cut and use the shortest blade suitable for the thickness of the material.
WARNING! Cut hazard. Blade breakage may occur if the blade does not extend past the foot plate and the
workpiece during the cut. Increased risk of personal injury, as well as damage to the foot plate and
workpiece may result.
CAUTION
:
Remove the battery pack first to prevent switch actuation before making any adjustments or removing or
installing attachments or accessories.
Jig saw mode
——Inserting the saw blade
WARNING! Wear protective gloves when assembling the saw blade. Contact with the saw blade can lead to
injuries. You can only use the t-shank blade type as shown in Fig C1.
This multi-purposed saw is equipped with a tool-free blade holder. This makes possible easy and quick changing of the
saw blade without any additional tools.
1) Place the jig saw upside down, rotate the blade holder counter-clockwise and hold in position.
2) Fully insert the blade into the blade holder slot with blade teeth facing forward to the front of the saw.
3) Release the blade holder and it will self-rotate back to clamp the blade tightly. Push the blade to ensure it is locked
in position. (See Fig. C2)
NOTE
: When using JIGSAW MODE, the blade teeth face forward to the front of the saw as shown in Fig. C3.
