BEFORE PUTTING INTO OPERATION
1. CHARGING YOUR BATTERY PACK
Do not use any charger other than that specifically provided for use with the equipment.
If the battery pack is very hot you must remove your battery pack from the charger and allow time for the battery to
cool down before recharging.
Please charge the battery to reach full before storage. If the tool will not be used for long periods of time, charge the
battery every 3 months.
Charging procedure (See Fig. E1)
1) Plug the charger into an appropriate outlet. The light will be
green flash.
2) Slide the battery pack into the charger, make sure the battery is in the correct charge position firmly. the light will
turn to
red
to indicate the charging process has started.
3) When charging is completed, the light will turn to
green.
4) After fully charged, unplug the charger and remove the battery pack.
NOTE:
If the battery pack is locked in the charger, press the battery pack release button and remove it.
WARNING:
When battery charge runs out after continuously use or exposure to direct sunlight or heat, allow time for
the tool to cool down before re-charging to achieve the full charge.
E1
