——Removing the saw blade
To remove a blade, place the jig saw upside down, hold the blade and rotate the blade holder counter-clockwise,
remove the blade from the blade holder slot and then release the blade holder. (See Fig. C4)
WARNING: The blade may be spring ejected so protect your eyes.
Reciprocating saw mode
——Inserting the saw blade
1) Lift up the pivot release lever fully and rotate the front portion of the saw into 0°positions to make this
multi-purpose saw to be a reciprocating saw. Restore the pivot release lever to lock (See Fig. D1).
2) Rotate the blade holder counter-clockwise and hold in position. Fully insert the blade into the blade holder slot
with blade teeth facing downwards to the base plate of the saw.
3) Release the blade holder, and it will self-rotate back to clamp the blade tightly. Push the blade to ensure it is locked
in position. (See Fig. D2)
NOTE
: When using RECIPROCATING SAW MODE, the blade teeth face downwards to the base plate of the saw as shown
in Fig. D3.
——Removing the saw blade
To remove a blade, hold the blade and rotate the blade holder counter-clockwise, remove the blade from the blade
holder slot and then release the blade holder . (See Fig. D4)
WARNING: The blade may be spring ejected so protect your eyes.