We recommend:
Read through the complete text in the operating instructions be- fore installing and commissioning the device.
The operating instructions are intended to help the user to be- come familiar with the machine and take advantage
of its ap- plication possibilities in accordance with the recommendations. The operating instructions contain
important information on how to operate the machine safely, professionally and econom- ically, how to avoid
danger, costly repairs, reduce downtimes and how to increase reliability and service life of the machine. In addition
to the safety regulations in the operating instruc- tions, you have to meet the applicable regulations that apply for
the operation of the machine in your country.
Keep the operating instructions package with the machine at all times and store it in a plastic cover to protect it
from dirt and moisture. Read the instruction manual each time before operat- ing the machine and carefully follow
its information.
The machine can only be operated by persons who were in- structed concerning the operation of the machine and
who are informed about the associated dangers. The minimum age re- quirement must be complied with.
In addition to the safety instructions contained in this operating manual and the specific regulations of your country,
the techni- cal rules generally accepted for the operation of machines of the same type must be observed.
We accept no liability for damage or accidents which arise due to non-observance of these instructions and the
safety in- formation.
3.
Device and accessories description (fig. 1-17)
1
Blow-off device
20
Assembly points
39
Allenkey 2
2
Mounting (Blow-off device)
21
Work lamp
40
hex key
3
Knurled screw
22
ON/OFF switch work lamp
41 Small wrench
4
Holder (Saw blade guard)
23
Saw blade 1
42 Spiral Cutting Bit 6mm
5
Saw blade guard
24
Allenkey,3mm
43 Spiral Cutting Bit 3.2mm x4
6
Saw table
25
Retaining device
44 Grinding wheel x3
7
Flexible Driver
26
Screw (retaining device)
45 Drill bits x2
8
Foot pedal
27
Table insert
46 Spiral Cutting Bit
9
Cover, left
28
Saw blade holder, top
47 Spiral Sanding band bit
12.7mm
10
Storage box
29
Uppersawbladeclampingscrew
48 Sanding band 12.7mm x6
11
Bearings
30
Lower saw blade clamping screw
49 Spiral Sanding band bit 6.3mm
12
Tightening lever
31
Saw blade holder, bottom
50 Sanding band 6.3mm x6
13
Arm
32
Angle (not included in the scope of
delivery)
51 Cut off wheel x 5
14
Graduated scale
33
Screw (degree scale)
52
15
Locking lever
34
Pointer
53
16
Suction connection & suction adapter
35
Screw (leftcover)
54
17
ON/OFF switch
36
Screw (leftcover)
55
18
Operating mode selection switch
37
Fine-wire fuse
19
Speed regulator
38
Saw blade 2
