T+A K8, Руководство по установке

Страница: 6 / 70

6
Basic settings of the K8
System settings (System configuration menu)
The System Configuration menu is used to enter general basic settings for the device. This menu is described in detail in
the following Chapter.
Calling up and operating
the menu
•
Briefly press the

button on the front panel or on the remote control
handset to call up the menu.
•
When you open the menu, the following Select points appear on the screen:
•
Use the

/

buttons to select a point in the menu.
•
If you wish to change a selected menu point, first press the

button,
and then use the

/

buttons to alter it.
•
After making the change, press the

button again to accept the new
setting.
•
You can press the

button at any time to interrupt the process; the
change is then abandoned.
•
Press the

button again to leave the menu.
Tone controls
menu point
Calls up the tone settings menu (Tone menu).

 

 

The tone control menu can also be called up directly using the

button
on the remote control handset.
For details see the chapter
'
Tone settings (Tone menu)
'
Picture settings
menu point
This menu point calls up the picture settings menu
(only displayed when a video source is selected).
      
This menu can also be called up directly using the

button on the FM100
hand-set.
For details see the chapter
'Picture settings (Video settings)'
Source names
menu point
At this menu point you can activate and disable external sources, and assign a
plain text name to each source; this name then appears in the screen displays.
When you call up this menu point using the

button, a list of all the
external sources of the
K8
appears. Each source is followed by the assigned
name, or - if you have disabled the source concerned - the note
'
disabled
'
.
If you want to activate / disable a source, or change the plain text name,
navigate to the appropriate line.
To activate a source, press the green button; pressing the red button disables
the source.
To change the plain text name, press the

button once more. Change
the name as you wish, then press

to confirm your choice. This action
stores the settings for the source.
      
When you call up Source Select using

or the source button

on
the front panel, any disabled sources are suppressed. This makes it easier to
select sources, and we recommend that you disable any sources not in use.