T+A K8, Руководство по установке

Страница: 39 / 70

39
 Pre AMP OUT
Pre-amplifier outputs
ZONE 4
Pre-amplifier output for providing sound in an additional listening zone using ac-
tive loudspeakers or an audio radio module.
SURROUND (ZONE3)
Pre-amplifier output for connecting active loudspeakers or an audio radio
module for the SURROUND channels.
      
If the SURROUND channels are not used for a 5.1 or 7.1 channel surround
system in the main room, active speakers or an audio radio module can be con-
nected here to provide sound in an additional listening zone.
BACK (ZONE2)
Pre-amplifier output for connecting active loudspeakers or an audio radio
module for the BACK channels.
      
If the BACK channels are not used for a 7.1 channel surround system in the
main room, active speakers or an audio radio module can be connected here to
provide sound in an additional listening zone.
RC
The RC sockets in each connector field can be used to connect an E2000 ex-
ternal infra-red remote control receiver. The K8 can be controlled remotely from
the associated listening zone using receivers connected here.
PWR
The PWR sockets function as the power supply for a
T+A
audio radio module.


The PWR sockets d5 V / 500 mA.
Please use these sockets only for the recommended genuine T+A supplemen-
tary devices.
If you wish to connect other makes of equipment, you must ensure that they
conform to the connection data stated above.
 System control
E
LINK
Control output socket for the

E
LINK
system.
RS 232
Software update interface, also used to control external devices.
      
The K8 can be used to control particular
METZ
and
LOEWE
TV sets with
specific features, using the appropriate

control lead which is available as
an optional accessory.
For more information please contact your specialist

dealer.
      
This interface can also be employed for computer-controlled operation of device
functions, making it possible to control the
K8
remotely using home automation
systems such as those made by CRESTRON, AMX, etc.
The
K8
must have special software installed if you wish to control it externally.
For detailed information on the RS 232 interface, the protocol required and
command lists please refer to the Technology and Download areas of the

website http://www.ta-hifi.com.
E2000 MAIN
Input socket for the

E 2000 remote control receiver.
This socket can be used if the
K8
is to be set up in a concealed location (e.g. in
a cabinet, behind glass doors, etc.), and the remote control receiver installed in
the front panel does not respond to the infra-red signals generated by the
remote control handset.