T+A K8, Руководство по установке

Страница: 30 / 70

30
Network settings for the Streaming Client
Opening the Network
Configuration Menu
First select the
K8
Streaming Client function by pressing the

/

button.
Open the configuration menu with a long press on the

button. You
should now see the configuration menu on the front panel screen.
Operating the Menu,
Changing and Storing
IP Addresses
Use the

/

buttons in the menu to select the network parameter
to be changed, and activate the entry with the

button.
You can now change the setting using the following buttons, depending on the
type of setting:

/

button for simple selection (ON / OFF)
Numeric buttons

to

for entering IP addresses
(remote control handset only)
Alpha-numeric input
for entering text
(remote control handset only)
When the setting process is complete, or when you have entered the complete
address, press the

button to confirm your action.
Alpha-numeric entry (remote control handset only)
At certain points, e.g. for entering server names or passwords, it is necessary to
input series of characters (strings). At such points you can enter letters, num-
bers and special characters by repeatedly pressing the numeric buttons on the
F100 / FM100 remote control handset, as when writing SMS news. The
assignment of letters to the buttons is printed below the buttons. Special
characters can be accessed using the

and

buttons:

0 + - * / ^ = { } ( ) [ ] < >

. , ? ! : ; 1 \ " ' _ @ $ % & # ~
Use the blue

button for toggling between numbers, capitals and lower-
case letters. The bottom line of the screen shows which input mode is currently
selected.
   
At certain points (e.g. DNS server name) it is possible to enter both an alpha-
numeric string and an IP address. At these points an IP address should be
entered like a string (with separating dots as special characters). In this case an
automatic check for valid address ranges (0 … 255) is not carried out.
Closing the Menu
Once you have correctly set all the parameters, select the menu point
'Save
and Restart'
, then press the

button. This action causes the
K8
to
accept the settings, and the machine restarts with the new network settings.
After the restart you should see the available network media sources (Internet
radio, UPnP-AV server, etc.) displayed in the main menu.
Interrupting the Menu
without Storing the Settings
At any time you can leave the network configuration menu without making any
changes to the network settings: this is done by pressing the

button,
which takes you to the menu point 'Exit without saving'. Pressing the

button at this juncture interrupts and closes the menu.