T+A K8, Руководство по установке

Страница: 10 / 70

10
Centre LS:
At this point you can define the size and bass response of the Centre loud-
speaker. The following options are available:
Small(r)
if no Centre speaker is present. The Centre channel is mixed
down onto the left and right main loudspeakers.
1 small
for small Centre speakers. The low-frequency bass signals of
the Centre channel (below the set cross-over frequency) are
mixed down onto other suitable loudspeakers and - if present
- the sub-woofer.
1 large
if the Centre speaker is approximately the same size as the
main speakers. The whole frequency range is reproduced via
the Centre channel, without restriction.
      
If your system does not include a Centre speaker, it is important not to situate
the main loudspeakers too far from the television set; they should also be set up
in a symmetrical arrangement relative to the TV. If you neglect this, the
localisation of dialogue on the screen will be very poor.
Surround LS:
At this point you can define the size and bass response of the Surround loud-
speakers.
Small(r)
no Surround speakers present.
1 small
one small Surround speaker present
2 small
two small Surround speakers present
1 large
one large full-range speaker present
2 large
two large full-range speakers present
      
If you system does not include surround speakers, the surround channels are
mixed down onto the left and right main loudspeakers.
At the “Small” setting the bass manager mixes the low-frequency bass signals
of the surround channels (below the set cross-over frequency) onto the front
loudspeakers and - if present - the sub-woofer.
At the “Full” setting the whole frequency range is reproduced by the surround
speakers without restriction. In this case the speakers must be capable of
reproducing low-frequency bass signals at full level.
Genuine surround sound is not possible without two surround speakers! A
single surround speaker located at the rear can provide a limited surround ef-
fect; it should be positioned centrally behind the listening point. In this case
select “1 small” or “1 full”, according to the size of the loudspeaker.