T+A K8, Руководство по установке

Страница: 27 / 70

27
Network category (wired network connection)
To be able to display BD-Live content, the
K8
must have Internet access.
Please connect the UPLINK socket on the back of the machine to your network.
Overview
Interface, connection status
and MAC address
The first three entries in the network menu are Status messages, i.e. they are
for information purposes only, and cannot be altered. Their function is as fol-
lows:
Interface:
(in this case always Cable) indicates that the
K8
is connected to the Internet by
a wired connection.
Connection status:
indicates whether the
K8
can currently access the Internet (Link up). If
'
Link
down
'
is displayed at this point, please check the connection to your network,
and / or your network settings.
MAC address:
this is a method of identifying your machine, and is required for Internet
communication.
IP mode,
IP address
Sub-net mask,
Gateway,
Primary DNS
Secondary DNS
At this point please state whether the
K8
is to obtain the data required for
Internet communication (IP address, sub-net mask, Gateway, DNS) auto-
matically, or whether you wish to configure these data manually.
Dynamic:
the
K8
obtains its IP address, sub-net mask, Gateway and DNS address
automatically. For this setting a DHCP-capable device must be present in your
network.
Manual:
in this case you have to enter the IP address, sub-net mask, Gateway and DNS
address manually. Selecting this setting activates the appropriate fields.
Network test
When you have completed the network configuration, you can check the net-
work settings here.

 

Please contact your network administrator if network access is not set up
correctly.