T+A K8, Руководство по установке

Страница: 13 / 70

13
Zone 2:
If your system does not include rear loudspeakers, the output stages for the
rear channels can be used to provide sound in an adjacent room (listening zone
2). In this menu point you can enter the settings required for listening zone 2:
Off
Zone 2 switched off.
Select this setting if listening zone 2 is not in use.
At this setting the rear channel output stages of the
K8
are switched off.
This saves energy, and the K8 develops less heat in use.
Separate
Zone 2 switched on – separate volume control.
Volume is controlled separately from that of the main loudspeakers.
This setting should be selected if the loudspeakers in zone 2 are set up in a
separate room, and their volume is controlled using their own remote control
handset. This arrangement requires an E2000 remote control receiver for
the adjacent room.
Linked
Zone 2 switched on – volume control in parallel with main room.
Volume is controlled in parallel with that of the main loudspeakers. This is a
sensible setting if the speakers in zone 2 provide sound in a listening zone
which forms a unit with the main space.
Fixed
Zone 2 switched on – fixed level.
Volume control for zone 2 is disabled; a fixed volume level is set.
This option can be used if the level is controlled by a volume control
installed locally in the adjacent room, or if active loudspeakers or audio
radio transmission systems with their own volume control are operated from
the zone 2 pre-amplifier output.
      
This menu point only appears if no rear loudspeakers are present, and you
have selected the “OFF” setting under the menu point “Rear loudspeakers”.
Zone 3:
If no surround loudspeakers are present in your system, the output stages for
the surround channels can be used to provide sound in an adjacent room (lis-
tening zone 3). In this menu point you can enter the settings required for lis-
tening zone 3.
The set-up options (OFF / Separate / Linked / Fixed) are the same as those
described above for zone 2.
      
This menu point only appears if no surround loudspeakers are present, and you
have selected the “OFF” setting under the menu point “Surround loudspeakers”.
Zone 4
The K8 features a pre-amplifier output (Zone 4) which can be used to provide
sound in a listening zone using active loudspeakers or an audio radio trans-
mission system. This listening zone is always available - i.e. even if you have
installed a full 7.1 channel surround system in the main room.
The set-up options (OFF / Separate / Linked / Fixed) for zone 4 are the same as
those described above for Zone 2.