T+A K8 Скачать руководство пользователя страница 52 | Manualshive

Страница: 52 / 70

background image

52

Picture:

No picture from the DVD
player.

Cause 1:

Video lead not connected, or defective.

Remedy:

Connect the video lead properly; have the lead checked by an expert.

Cause 2:

Video monitor not set to the correct picture input, or an incorrect video norm
selected for the input.

Remedy:

Select the picture input (AV input) on the video monitor to which your K2 is
connected.
If you are using a SCART input, please check whether the video norm (FBAS,

S-Video, RGB, YUV) is set to match the output of the

K8

which is in use.

No picture from the iPod.

Cause 1:

Video output switched off at the iPod.

Remedy:

Switch on video output on your iPod.

Cause 2:

Your iPod does not support video output.

Remedy:

Ensure that you are using a model of iPod which supports video output.

No picture at AV input AV IN
1

Cause:

The CVBS input socket of the

AV IN 1

input is DC-coupled.

Any device

connected here must supply a CVBS video signal with D.C. component (0.5 …2
V), otherwise it will not be possible to process the video signal.
If the CVBS video signal has no D.C. offset, the TV monitor displays no picture.

Remedy:

Please use the AC-coupled CVBS input

AV IN 2

for CVBS signals without D.C.

offset.

Jerky picture with BluRay
or DVD reproduction

Cause:

The set frame rate does not match the disc being played.

Remedy:

Wherever possible, select the “AUTO” setting In the Display Resolution point of
the BluRay setup menu. The K8’s BluRay player will then automatically set itself
up correctly to suit the capabilities of your monitor and the requirements of the
disc.

If  you select  a setting  other  than  AUTO,  then  you must also  enter  the  correct
setting under “Colour system” to suit the disc you wish to play.
Select for
PAL-DVD :=

PAL (50 Hz),

NTSC-DVD := NTSC (60 Hz)
BluRay:=

PAL or NTSC - according to the disc. If no information is
stated on the BluRay disc, you can only establish the correct
frame rate by practical testing.

When you change the disc, you may need to adjust the frame rate again to suit
the requirements of the new disc.

«
...
50
51
52
53
54
...
»

Содержание K8







































































Отзывы:

Нет отзывов

Похожие инструкции для K8

Бренд: Radio Shack Страницы: 20

Бренд: DaytonAudio Страницы: 6

Бренд: Offel Страницы: 2

Бренд: DaytonAudio Страницы: 4

Бренд: Hamilton/Buhl Страницы: 16

Бренд: Hamilton Electronics Страницы: 5

Бренд: Laney Страницы: 7

Richter Bass RB2

Бренд: Laney Страницы: 16

Бренд: Laney Страницы: 24

Бренд: Laney Страницы: 6

Бренд: Zahl Страницы: 20

Бренд: Ross Страницы: 10

Бренд: Lab.gruppen Страницы: 40

Бренд: Unika Страницы: 16

Бренд: Bugera Страницы: 15

Бренд: A SYSTEMS Страницы: 42

Бренд: TDT Страницы: 9

Бренд: BRUEL & KJAER Страницы: 54

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды