Systec deltawaveC-P Скачать руководство пользователя страница 27

Страница: 27 / 139

deltawaveC-P

User manual

systec Controls Mess- und Regeltechnik GmbH 27/139
www.systec-controls.de

6.1.4. The status bar

The status bar is located in the uppermost row of the display.

Time:

Displays the current time. This is also the system time. A time stamp

that is derived from the system time will be applied to the measurement
data you subsequently log.

SD memory:

Displays the free space on the internal SD memory card of

the device (standard is 2 GB).

Backup battery:

Provides information about the status of the rechargeable

battery, e.g.:

•

Load:

The device is powered using the power adapter while the

battery is charged. The empty battery needs a charging time of
approx. 5 hours

•

Full:

The battery is in charged state. The device any be operated

for a time of approx. five hours when the display backlight is
switched off and for approx. three hours when it is switched on.

Percentage display:

Displays the charging state of the battery

Содержание deltawaveC-P












































































































































Результаты поиска

Содержание deltawaveC-P

Отзывы:

Systec deltawaveC-P, Руководство пользователя, Страница: 27 / 139

Результаты поиска

Содержание deltawaveC-P

Отзывы: