Symphony C-I-CV43C, Инструкция

Страница: 82 / 174

WBPEEUI220772A0 PR5 - 1
PR5
Wedge Table Installation
Purpose/Scope
This procedure explains how to install wedge tables in an
array.
Parts
Tools
•
-inch open end wrench.
Procedure
□
1. Place the wedge table upside down on the floor or
workbench.
□
2. Position the four brackets so that the orientation after fas-
tening will be as shown in Figure
PR5-1 .
□
3. Place a spring lock washer and then a flat washer over the
1.75-inch long hex head cap screws.
□
4. Use the -inch open end wrench to fasten the brackets to
the wedge table using the assemblies from Step 3.
□
5. Position the wedge table between two components in the
array.
□
6. Place a spring lock washer and then a flat washer over the
0.75-inch long hex head cap screws.
10 min.
Number Qty Description
197846?1 2 Pin, retaining
6638635?1 4 Bracket
6638636?1 1 15° wedge table (IICPI01)
6639210?1 45° wedge table (IICPI02)
NTCAC13000 4 Washer, flat
NTJAC13030 4 Lock washer, spring
NAUAC25012 4 Hex cap screw, 0.375-16 x 0.75 long
NAUAC25028 4 Hex cap screw, 0.375-16 x 1.75 long
9 16
⁄
9 16
⁄