Symphony C-I-CV43C, Инструкция

Страница: 58 / 174

WBPEEUI220772A0 B - 1
Appendix B
Factory Cabling
Introduction
This appendix contains a factory cabling table and diagram for
the Conductor VMS Series 43 Auxiliary Terminal. This appen-
dix shows factory cabling only and is intended as a reference or
for repair. For specific customer cabling, refer to the appropri-
ate procedure. Table
B-1 and Figure B-1 contain the cabling
information.
Table B-1. Factory Cabling
Cable No.
(Fig. B-1 )
Part No. Connect From Connect To
1 1947950?1 J2 on PEP AC power in on CPU
2 1947950?5 J3 on PEP Power connector on monitor 2
3 1947950? AC power out on CPU AC power connector on
monitor 1
4 6639637?4 P9 on IIMKM02A module RS-232-C port (Port 2) on CPU
5 6642339?1 P8 on IIMKM02A module Keyboard port on CPU
6 1949207?5 SCSI port on CPU SCSI cable (7)
7 6641230?1 Item 6 Peripheral port on PEP
8 6641230?1 P10 on keyboard interface
assembly Mouse port on CPU through
adapter
11 6634512?26N72 P5 on IIMKM02A module P1 on keyboard interface
assembly
12 6634512?26N72 P6 on IIMKM02A module Rear terminal block on PEP
13 6638713?1 P2 on keyboard interface
assembly P3 on DC distribution board
14 6638713?2 P1 on IIADP02 panel P4 on DC distribution board
15 6638719?1 Reset switch on PEP P4 on IIMKM02A module
16 6638720?4 Degauss L on PEP 9-pin connector on rear of
monitor 1
17 6638720?5 Degauss U on PEP 9-pin connector on rear of
monitor 2