Symphony C-I-CV43C, Инструкция

Страница: 81 / 174

PR4 - 2 WBPEEUI220772A0
Procedure
□
2. Move the work surface up to 6.35 millimeters (0.25 inches)
up, down, forward or back toward the cabinet to line up the
work surfaces.
□
3. Two steel alignment pins are shipped inside the brass
bushings located on each side of each work surface. When two
work surfaces are lined up, push the pins outward into the
bushing of the tabletop to the right of the cabinet.
□
4. Use the ½-inch open end wrench to tighten the six bolts.