Symmetricom TimeProvider 500, Руководство пользователя

Страница: 97 / 174

098-00172-000 Revision A – December, 2009 TimeProvider 500 2.0 User’s Guide 97
Chapter 4 CLI Commands
Set Commands
Response :
updated accepted
set udesc
This command is new for version 2.0
This command sets the user description field shown when using the show inventory
command. Recommended use is <user defined name of device>;<user defined
physical location>. The semicolon is defined as a field delimiter for text in
IEEE-1588. The user description string can be up to 64 characters with no spaces.
Use quotation marks at both ends of the string. For uppercase, use the right and left
parentheses. The following example shows when a user enters a user description in
uppercase letters.
Syntax:
TP-500> set udesc
Example:
TP-500> set udesc
"
(ABCDE)
"
Response:
User data set to
"
ABCDE
"
Using the show inventory command, the new user description settings are shown.
TP-500> show inventory
Product Number : 090-03863-02
Firmware Version : 2.0.0
Product Version :
Serial Number : r45091
User description : ABCDE
set vlan-config
This command is updated from version 1.0 to support connection interfaces .
Note : This command can be used to change the password, user
name or both. To change only the user name, the new password
entries must be the same as the old password. To change only the
password, the user name entry must be the same as the current user
name.
Symmetricom recommends that you record password changes to
avoid a possible service call to gain access to the TimeProvider 500.