Symmetricom TimeProvider 500, Руководство пользователя

Страница: 86 / 174

86 TimeProvider 500 2.0 User’s Guide 098-00172-000 Revision A – December, 2009
Chapter 4 CLI Commands
Set Commands
set clock time
This command sets the date and time for use in logging and alarm reporting. The
time and date results may be overwritten if a qualified master clock is providing
time.
Syntax:
set clock time HH : MM : SS date MM / DD / YYYY
Range:
HH = [00, 01, … , 23] = hour
MM = [00, 01, … , 59] = minutes
SS = [00, 01, … , 59] = seconds
MM = [01, 02, … , 12] = month
DD = [01, 02, … , 31] = day
YYYY = [2008, … , 2089] = year
Leading zeros are never required
Default:
00:00:00 01/01/1970
Example:
set clock time 09:30:00 date 09/17/2008
Response:
Time is: 09:30:00 09/17/2008
set clock timescale
This command in new for version 2.0.
Note : The
set configuration
command does not alter the
time and date.
Note : The time and date is not updated while TimeProvider 500
is powered-down. Also, the date and time values are not stored
in non-volatile memory and will not be recovered on
power-cycle. For more information, see
Date & Time , on page
70.