Symmetricom TimeProvider 500, Руководство пользователя

Страница: 92 / 174

92 TimeProvider 500 2.0 User’s Guide 098-00172-000 Revision A – December, 2009
Chapter 4 CLI Commands
Set Commands
IP if1 192.168.2.52, netmask: 255.255.255.0, gateway: 192.168.2.1
set ipdv interval
This command in new for version 2.0.
This command configures the observation period over which all IPDV
measurements are taken. IPDV settings and results can be shown with the
show
status-list command.
Syntax:
Set ipdv interval interval_value
Range:
1 to 255 minutes
Example:
Set the interval to 15 minutes.
Set ipdv interval 15
Response:
IPDV interval set to 15 minutes
set ipdv pacing
This command in new for version 2.0.
This command configures the observation pacing factor for the forward and reverse
IPDV inter-packet jitter measurement. The pacing factor identifies how often to
select a data point for the jitter analysis. For example, if pacing value is 128, every
128th sample will be used for jitter assessment (in either flow direction). IPDV
settings and results can be shown with the
show status-list command.
Syntax:
Set ipdv pacing samples
Range:
1, 2, 4, 8, … , 256, 512 samples
Example:
Note :
set configuration factory
configures the TimeProvider
500 to the default settings.
set configuration default
does
not alter the current IP address, gateway, and netmask settings.
When the IP address is changed, the settings take immediate effect.