Symmetricom TimeProvider 500, Руководство пользователя

Страница: 35 / 174

098-00172-000 Revision A – December, 2009 TimeProvider 500 2.0 User’s Guide 35
Chapter 2 Installation & Configuration
Installation
Unpack and inspect the unit as follows:
1. Inspect the container for signs of damage. If the container appears to be
damaged, notify both the carrier and your Symmetricom distributor. Retain the
shipping container and packing material for the carrier to inspect.
2. Open the container, being careful to cut only the packaging tape.
3. Locate and set aside the printed information and paperwork that is included in
the container.
4. Remove the unit from the container and place it on an anti-static surface.
5. Locate and set aside small parts which may be packed in the container.
6. Remove the accessories from the container.
7. Remove the anti-static packaging from the unit and accessories.
8. Follow the instructions for assembling the rack mounts to the TimeProvider 500.
See Part Numbers and Return Information , on page 99 for more information.
9. Verify that the model and item number shown on the shipping list agrees with the
model and item number on the equipment. The item number can be found on a
label affixed to the top of the unit. See
Figure 2-1 for the location of the label.
Contact your Symmetricom distributor if the model or item number does not
match the information on the shipping list.
For a complete listing of item numbers, see Part Numbers and Return Information ,
on page 99.
Figure 2-1. Location of TimeProvider 500 Product Label