Symantec NetBackup 5220, Руководство по устранению неисправностей оборудования

Страница: 159 / 169

Appendix B: Regulatory and Certification Information 159
CE Declaration of Conformity (Europe)
This product has been tested in accordance to, and complies with the Low Voltage
Directive (73/23/EEC) and EMC Directive (89/336/EEC). The product has been
marked with the CE Mark to illustrate its compliance.
VCCI (Japan)
This is a Class A product based on the standard of the Voluntary Control Council for
Interference (VCCI) from Information Technology Equipment. If this is used near a
radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.
BSMI (Taiwan)
The BSMI Certification Marking and EMC warning is located on the outside rear
area of the product.
Regulated Specified Components
To maintain the UL listing and compliance to other regulatory certifications and/or
declarations, the following regulated components must be used and conditions
adhered to. Interchanging or use of other components will void the UL listing and
other product certifications and approvals.

Server Chassis:
(base chassis is provided with power supply and fans) - UL
listed.

Server board:
you must use an Intel server board - UL recognized.

Add-in boards:
must have a printed wiring board flammability rating of
minimum UL94V-1. Add-in boards containing external power connectors
and/or lithium batteries must be UL recognized or UL listed. Any add-in board
containing modem telecommunication circuitry must be UL listed. In addition,
the modem must have the appropriate telecommunications, safety, and EMC
approvals for the region in which it is sold.

Peripheral Storage Devices:
must be UL recognized or UL listed accessory
and TUV or VDE Certificationd. Maximum power rating of any one device is
19 watts. Total server configuration is not to exceed the maximum loading
conditions of the power supply.