Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0, Руководство по внедрению

Страница: 61 / 192

5 If you use TLS to secure communications, Intel SCS requests a certificate for
Intel AMT from a Microsoft certification authority (CA) server.
6 If you enabled integration with Active Directory, Intel SCS defines the device
as an AMT object in the Microsoft Active Directory domain controller.
7 The Intel SCS service completes configuration using SOAP commands.
After setup and configuration, the computer is ready for out-of-band management
with Altiris solutions.
See “Altiris products that can manage computers out of band” on page 15.
See “Prerequisites for Intel AMT configuration” on page 61.
See “Configuring Intel AMT computers for out-of-band management” on page 61.
Prerequisites for Intel AMT configuration
Before you proceed with Intel AMT setup and configuration, the following
conditions must be met:
■
An OOB site server is installed in your environment and the AMTConfig service
is running.
See “About OOB site servers” on page 118.
■
The OOB site server computer is registered in the DNS as ProvisionServer.
See “About configuring DNS” on page 33.
■
You configured the firewall to allow incoming traffic to Intel SCS.
See “Configuring a firewall to allow Intel SCS and SQL server connections”
on page 39.
■
You discovered out-of-band capable computers and installed the management
agents.
See “Preparing target computers for management” on page 49.
Configuring Intel AMT computers for out-of-band
management
To configure Intel AMT computers for out-of-band management in enterprise
mode you must complete the following steps:
See “About Intel AMT configuration modes” on page 18.
61 Configuring Intel AMT computers for out-of-band management
Prerequisites for Intel AMT configuration