Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0, Руководство по внедрению

Страница: 142 / 192

DNS configuration page
The computer with Intel SCS installed (the OOB site server computer) must be
registered in DNS as ProvisionServer. This must be done in each DNS domain.
Intel AMT devices send their Hello packets to this host name.
This page lets you test if the DNS is configured correctly.
Note:
If this test fails, you cannot use the Remote Configuration feature.
See “Initializing Intel AMT computers using the Remote Configuration feature”
on page 65.
Also, you cannot set up and configure the Intel AMT capable computers that were
initialized by an OEM or with a USB key. Only computers with Intel AMT device
initialized through MEBx can be configured.
See “Initializing computers manually through MEBx” on page 80.
Table 10-14 Options on the DNS configuration page
Description Option
Click to see if DNS is configured correctly. Verify that the IP of the ProvisionServer
matches the IP of Intel SCS. Test
General page
This page lets you modify general settings of the Intel AMT Setup and
Configuration Service (Intel SCS).
This page modifies the settings of the Intel SCS that you selected as default on
the Service Location page.
See “Service location page ” on page 148.
The default settings are adequate for normal operation of Intel SCS. However, if
you want to use Kerberos users or 802.1x profiles, you must integrate Intel SCS
with Active Directory and check Active Directory Integration on this page.
See “Integrating Intel SCS with Active Directory” on page 55.
About Out of Band Management Component pages
DNS configuration page
142