Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0, Руководство по внедрению

Страница: 79 / 192

6 If you want to generate new keys, click Generate keys before export, and
then specify the following options for generating the key file:
Type a number equal or greater than the number of
Intel AMT computers you want to initialize with the
USB key. Each key is used only once. There is no
problem with exporting extra keys for use later or
even not at all. Number of security keys to
generate
The value for Intel AMT computers in factory default
state is "admin".
(Intel AMT 2.5, 3.0, 4.0, and 5.0 only) If you changed
the default MEBx password through the computer's
BIOS, specify your password.
Factory default Intel
Management Engine (MEBx)
password
This password will replace the default MEBx
password.
See “About Intel AMT related credentials”
on page 22.
Note:
You must type a strong password.
See “About passwords used with Intel AMT”
on page 177.
New Intel Management Engine
password
7 Click Generate.
A file with the keys is created in the format expected by the platform BIOS.
8 Click the Download USB key file link, and then save the file to the USB key.
9
Click Close.
The exported keys are also added to the Intel SCS database.
10 Go to the physical location of the Intel AMT computer, and then connect the
cables (including network), a monitor, and a keyboard.
11 Insert the USB key and power-up or restart the computer.
12 Follow the on-screen instructions to initialize the computer.
The specific PID-PPS key pair that is used to initialize the computer is marked
on the USB key as used, so the key cannot be used again.
79 Configuring Intel AMT computers for out-of-band management
Configuring Intel AMT computers for out-of-band management