Symantec ALTIRIS OUT OF BAND MANAGEMENT COMPONENT 7.0 SP3 - V1.0, Руководство по внедрению

Страница: 78 / 192

system board battery or pressing the reset button if the system board has such a
button.
If you do not want to reset the MEBx, use the MEBx initialization method for
systems with changed passwords.
See “Initializing computers manually through MEBx” on page 80.
It is important to have the USB key properly configured. USB key requirements
vary from hardware vendor to vendor, but your USB key should work on most
computers if you meet the general USB key requirements.
The USB key requirements are as follows:
■
Format the USB key with FAT16 (some USB keys come formatted with FAT32).
■
We do not recommend using USB keys larger than 512 MB.
■
The setup.bin file must be the only file that is stored on the USB key.
See “Initializing Intel AMT computers manually ” on page 76.
To initialize Intel AMT manually using the USB key
1 In the Symantec Management Console, on the Settings menu, click All
Settings.
2
In the left pane, click Remote Management > Out of Band Management >
Configuration Service Settings > Security Keys.
3 (Optional) To use previously generated keys that have not been used, on the
Security Keys page, click the PID-PPS keys you want to export to the USB
key.
4
On the Security Keys page, click the Export security keys to USB key symbol.
5 If you want to export the keys that you have already generated, in the Export
Security Keys to USB Key dialog box, click All or Only Selected.
Configuring Intel AMT computers for out-of-band management
Configuring Intel AMT computers for out-of-band management
78