Symantec 10521148 - Network Security 7161, Руководство по внедрению

Страница: 87 / 214

79 Initializing Symantec Network Security
Serial console initial configuration
10
Enter date in MMDDhhmmYY format:
Type the current month, date, hour, minute, and year using two digits for
each. For the hour, use 24 hour format. For example, May 12, 2004 at 1:05pm
is entered as: 0512130504.
11
Superuser password (6-14 characters):
Type the password for this node. The characters are not displayed on the
console window.
This password is used for:
■
superuser account on the Network Security console
■
Unlocking the LCD panel
■
operating system
secadm
account
■
operating system
root
account
■
elevate
command used by
secadm
Note: You can change the passwords for
root/elevate
and
secadm
/ LCD
unlocking after initial configuration. You can also change the password for
the Network Security console
superuser account.
12
Please enter the password again:
Re-enter the password for confirmation.
13
Is this node behind NAT? [yes/NO]
Do one of the following:
■
If you do not use Network Address Translation (NAT) when accessing
the appliance, press
Enter to accept the default,
NO
.
■
If the node is behind a NAT router, type
yes
, press Enter , and at the next
prompt:
Enter NAT address:
type the externally visible IP address. This is the address that the
Network Security console will use to connect to the node.
14
Configuration Information:
Local IP Address : 10.10.10.5
Netmask : 255.255.255.0
Gateway : 10.10.10.1
Master Node? : Yes
Qsp node number : 1
Qsp proxy port : 62432