Symantec 10521148 - Network Security 7161, Руководство по внедрению

Страница: 57 / 214

49 Installing the 7100 Series
Cabling
Cabling
Most of the cabling on the appliance has to do with network connections. There
are no keyboard, mouse, or video interfaces to connect. You need to connect
cables to the monitoring ports, management port, reset ports, and power supply.
Optionally, you may wish to cable the serial port and, if you have a Symantec
Network Security In-line Bypass unit, a USB port.
Cabling for model 7120
This section describes cabling for model 7120. If you have a different model,
refer to the appropriate section.
See “Cabling for model 7160” on page 54.
See “Cabling for model 7161” on page 62.
The following topics are covered here:
■
Connecting the management, reset, and serial ports
■
Cabling for passive mode monitoring
■
Cabling for in-line mode monitoring
■
Cabling a bypass unit for fail-open
■
Powering the 7120 on or off
Warning: To prevent a possible electric shock, do not connect the power until all
other cabling is done.
Figure 4-1 shows the back panel of the 7120.
Figure 4-1
7120 back panel
1 - Power supply
2 - Master power switch
3 - Serial port
4 - USB ports
5 - Monitoring port 0
6 - Monitoring port 1
7 - Monitoring port 2
8 - Monitoring port 3
9 - Reset port
10 - Management port
11 - Compact flash adapter
12 - Reset power switch