Symantec 10521148 - Network Security 7161, Руководство по внедрению

Страница: 119 / 214

111 Configuring nodes and interfaces
Configuring appliance interfaces
Adding or editing an in-line pair
This section describes the procedure for adding or editing an in-line pair. Note
that the in-line pair choices are pre-defined in the Network Security console.
Other interface combinations are not supported as in-line pairs.
To add or edit an in-line pair
1 On the Devices tab, do one of the following:
■
Right-click on the 7100 Series node object and click Add In-line Pair in
the pop-up menu.
■
Right-click on an existing in-line pair object and click Edit in the pop-
up menu.
2 In Add In-line Pair or Edit In-line Pair , enter a descriptive name.
3 In Expected Throughput , click the expected throughput in the pull-down
list.
The selected value must be less than or equal to the bandwidth license for
this node.
See
“Licensing” on page 91.
4 In Pair , click the interface pair in the pull-down list.
The selected interfaces must be cabled for in-line mode. See “Cabling” on
page 49.
5 In Description , optionally enter descriptive text about this in-line pair.