Symantec 10521148 - Network Security 7161, Руководство по внедрению

Страница: 60 / 214

52 Installing the 7100 Series
Cabling
Figure 4-4 depicts a 2 In-line Bypass unit deployed with a 7120 and other
network devices.
Figure 4-4 2 In-line Bypass unit deployed with 7120
Note: Follow the cabling instructions carefully to match each in-line interface
pair with its associated port group on the bypass unit. Connect in-line pair 0
(ports 0/1 on the appliance) to port group 0 on the bypass unit. Connect in-line
pair 1 on the 7120 to port group 1 on the bypass unit.
The Net A port of each port group on the bypass unit is implemented as
10/100/1000Base-TX. You may need a crossover cable to connect Net A to some
devices. This is more likely when connecting Net A to an older switch that does
not provide automatic pair reversal. The Net B port of each port group is
NetA
AppA AppB
NetB
Port group 0
Port group 1
0 - Port 0
1 - Port 1
2 - Port 2
3 - Port 3 4 - In-line pair 0
5 - In-line pair 1
7120
2 In-line Bypass unit