Symantec 10521148 - Network Security 7161, Руководство по внедрению

Страница: 48 / 214

40 Deploying the 7100 Series
Deployment options
Rear panel LEDs on the bypass unit
The rear panel status LEDs are located in the top left and top right corners of
each port in the port groups. On the bypass unit, the LEDs are labeled only for
the top ports, but the labels apply to the ports in the lower port group as well.
Figure 3-7 shows the bypass unit rear panel LED configuration.
0 P0 Port group 0 The P0 LED glows when port group 0 is
operating in online mode.
1 P1 Port group 1 The P1 LED glows when port group 1 is
operating in online mode.
2 P2 Port group 2 The P2 LED glows when port group 2 is
operating in online mode.
3 P3 Port group 3 The P3 LED glows when port group 3 is
operating in online mode.
MGMT
4 TX Transmit data The TX LED blinks when the bypass unit is
transmitting data on the USB connection.
5 RX Receive data The RX LED blinks when the bypass unit is
receiving data on the USB connection.
PWR
6 PS1 Power supply 1 The PS1 LED glows when power supply 1 is
connected to a power source.
7 PS2 Power supply 2 The PS2 LED glows when power supply 2 is
connected to a power source.
Table 3-4 Bypass unit front panel LED descriptions
Diagram
location LED label LED name Description