Swissvoice Eurit 595, Руководство пользователя

Страница: 87 / 103

20
40
00
32
en
_b
a_
a0
83
Symptom Cause Remedy
No display. Handset not Press the connect key.
switched on.
Batteries discharged or
Charge handset/
incorrectly inserted. batteries. See pp. 12, 13.
Display contrast on the Increase display contrast,
base station insufficient. p. 56.
No radio connection Handset not Log on handset.
to the base station. logged on. See p. 51.
Cannot get a line, Telephone connectors Check connectors at both the
no dial tone. not properly inserted. telephone socket and base
station; if necessary, dis-
connect and reconnect, p. 11.
AC adapter connectors Check the connector at the
not properly inserted. base station and the 230 V
mains plug at the socket.
If necessary remove and
reconnect, p. 11.
Handset or base station Ringer is switched off or Adjust ringer volume.
does not ring. set at a low volume. See pp. 55, 59.
No MSN allocated to the Allocate MSN to the
handset. handset. See p. 21.
Only on a PBX: no Public access code not Enter public access code.
connection or wrong entered. See p. 61.
number when dialling Incoming code Set incoming code,
from speed-dial memory. incorrectly set. see p. 61.
Handset does not ring Ringer is switched off. Switch ringer on, p. 55.
when an external call Volume is on minimum. Adjust volume, p. 59.
arrives. Babyphone is switched on. Switch off babyphone, p. 62.
MSN is not allocated. Allocate MSN to the handset,
p. 21.
General information
Troubleshooting
Most malfunctions are not due to a defect in your telephone.
You can often correct minor faults yourself by briefly interrupting the power supply to
the base station (switching the plug-in power supply on/off) or by removing the batteries
of the handset and inserting them again. The following information will help you to
remedy specific problems.