20
40
00
32
en
_b
a_
a0
12
Setting up the telephone and putting it into service
Disconnecting the base station
1. First unplug the power supply unit
from the 230 V outlet.
2. To release the plug, press the snap-in
clip toward the plug body (e.g. using a
small screwdriver) while pulling the
plug out by the cord.
Inserting the batteries
in the handset
1. Remove the battery compartment
cover by lightly pressing on the edge
of the cover and sliding it downward.
2. Insert the 3 batteries into the battery
compartment as shown. Make sure
the polarity is correct.
Note:
If the batteries are inserted incorrectly, the
handset will not function and damage may
result. Use only the same type and brand
of batteries in the compartment at any
given time.
3. Replace the battery compartment
cover and slide it back until it clicks
into place.
Содержание Eurit 595
Страница 102: ......