20
40
00
32
en
_b
a_
a0
51
Using multiple handsets
The telephone allows you to operate up to
6 handsets on one base station.
You can make two internal calls for each
of two handsets and at the same time two
external calls can be made.
Each additional handset must be logged
onto the base station and allocated an
internal number.
Each internal subscriber number (1–6) may
be allocated only once. It is shown on the
handset display in standby mode. The base
station is permanently allocated subscriber
number 7.
Note:
If during operation with multiple handsets
two of the handsets have already seized
the external line, the busy tone sounds on
the third handset. However, you can still
make internal calls.
Each handset can be logged on to a
maximum of 4 base stations (A–D).
Logging on a handset
At the base station:
1.
Select
P m
>
System
settings
>
Log
on
>
Base
st.
ready
.
2.
Press
OK
.
3.
Press
YES
.
The connection indicator on the
base station (red light) flashes.
For 60 seconds the base station is
ready for a handset log on!
On the handset:
1.
Select
P m
>
BaseStat.setting
>
Log
on
>
On
base
station
.
2.
Enter the base station PIN (default
is “0000”).
3.
Press
OK
.
4.
Specify the handset’s new internal
subscriber number (1–6).
5.
Press
OK
.
6.
Specify the name of the base
station (A–D).
7.
Press
OK
.
8.
Press
YES
.
If log on was successful, the specified letter
(A–D) appears in the display of the base
station.
Note:
If the internal call number is seized a second
time, the handset first logged onto it is
logged off.
A question mark shows in the display if the
logging-on process failed.
To log on a handset, you must be within
range of the base station.
Logging a handset onto a third-
party base station (GAP)
To log your handset onto a third-party base
station, the handset must support GAP
(generic access profile). Follow the manu-
facturer’s instructions to prepare the third-
party base station for log on.
Prepare handset:
1.
Select
P m
>
BaseStat.setting
>
Log
on
>
On
other
syst.
2.
Enter the 4–8 digit access code
(AC) of the already prepared base
station (e.g. 12345).
3.
Press
OK
.
4.
Specify the name of the base
station (A–D).
5.
Press
OK
.
6.
Press
YES
.
Содержание Eurit 595
Страница 102: ......
