Swissvoice Eurit 595, Руководство пользователя

Страница: 60 / 103

20
40
00
32
en
_b
a_
a0
56
Device settings
You can customize the settings of your
telephone to meet your personal
requirements. To do that, perform the
device settings below.
Setting the language
You can select the language to use for the
menu navigation:
1.
Select P m >
Device settings
>
Language
.
2. Press
OK
.
3. Use V , v to select the desired
language.
4. Press X .
The menu changes to the new
language.
Handset:
The function is found on the handset in
the “Handset settings” submenu.
The language can be individually set for
each handset.
Display contrast
You can set the display contrast of your
base station (not possible on handsets).
1.
Select P m >
Device settings
>
Displ. contrast
.
2. Perform the desired setting with
≤ , ≥ in the
menu
or with
-
,
+
keys
or with
1
to
8
on the base station.
Define user name
See the section “Comfort through ISDN –
Specifying a user name”.
Switching the handset on/off
You can switch your handset off to main-
tain the battery capacity for a longer period:
1.
Select P m >
Handset settings
>
Handset off
.
The handset is switched off.
Incoming calls are not signalled.
The display is inactive.
2. Press
b
.
The handset is switched on again.
Note:
The base station continues to signal incom-
ing calls whether the handset is on or off,
provided it is allocated to the MSN.
Selecting the battery type
of the handset
The telephone is supplied with three re-
chargeable batteries. If you use batteries
which are different from those supplied,
make sure that the battery type is set to
“NiMH” or “NiCd” as appropriate.
If you change the type of battery used, you
have to select the applicable battery type:
1.
Select P m >
Handset settings
>
Battery type
>
NiMH
or
NiCd
.
2. Press X .
Note:
If the handset is programmed to the wrong
battery type, the batteries may be damaged
or their available capacity may not be fully
used. NiMH batteries have a greater capac-
ity than NiCd batteries.