Swissvoice Eurit 595, Руководство пользователя

Страница: 80 / 103

20
40
00
32
en
_b
a_
a0
76
Operating the answering machine by remote access
Introduction
You can remotely operate your answering
machine for each MSN (user) from any
telephone or mobile phone:
• Switch on/off
• Record, select and delete outgoing
messages
• Play back and delete recorded
incoming messages
DTMF (tone dialling) signals are required
for remote operation of your answering
machine. You can do this with a DTMF-
enabled telephone (one that permits tone
dialling), a mobile telephone, or a code
transmitter (manual transmitter).
Note:
Remote access is automatically terminated
if no function is performed within 24
seconds.
Do not press any keys on the keypad while
the acknowledgement tone sounds.
Remote access PIN
(for each MSN)
The remote access PIN is required if you
want to activate remote access on your
answering machine:
1.
Select P m >
Answer. machine
>
Settings
>
Remote PIN
.
2. Enter 4-digit PIN.
3. Press
OK
.
Note:
In the default setting, remote access is
deactivated. Please remember your new
remote PIN! Should you forget, your device
will need to be accessed by a technician at
your expense.
To bar the remote access function, enter
the remote PIN “0000”.
Points to remember when using
remote access
All functions can be cancelled or stopped
by pressing the numeric key
]
.
To end remote access, replace the receiver
or disconnect the call on your mobile
phone.
Access with VIP number
for each user (MSN)
If a VIP number has been programmed, the
VIP subscriber can operate the answering
machine remotely without having to enter
the remote PIN:
1. Call using the relevant MSN.
2. Press the 3 key within 5 seconds
after the ready beep.
The messages are played back.
3. Remote access is explained on the
following pages.
Note:
Following the greeting message and within
five second after the ready beep (without
pressing any keys), a message can be
recorded. The greeting message or stand-
ard message must be set.