Swissvoice Eurit 595 Скачать руководство пользователя страница 45

Страница: 45 / 103

During a call – switching functions

Alternating between calls
(brokering)

You have initiated an inquiry and the display
offers

≥

. You can now alternate

(broker) between two calls as required:

Press

≥

You alternate between call partners.

Three-party conference

You are brokering and can now set up a
three-party conference so that all three
parties can speak with each other at the
same time:

Select

P m

3pty conference

Note:

A three-party conference is only possible
between one external and two internal
connections, or between one internal and
two external connections.

Return to brokering,
end three-party conference

You are holding a three-party conference.
1.

Press

≥

You are now brokering again and
connected to the last call partner.

End brokering

You are brokering.
1.

Select

P m

End

active

call

The connection to the active call
partner is terminated. You are
again connected to the other call
partner, who has been on hold.

Call handover/connect

You are in the middle of a call and have
initiated an inquiry to another call partner
(see “Inquiry”):

If you are connected to the second
call partner (inquiry):

hang up.

The call is handed over.

If you are not yet connected to the
second call partner.

hang up.

The call is connected, i.e. the
second call partner is being called.
If this call partner is not available,
the call partner who did the
switching is called back.

Handset:

Hang up with

Note:

Only possible with two external subscribers,
provided ECT is switched on and supported
by the network (Centrex, TVA).

Содержание Eurit 595








































































































Результаты поиска

Содержание Eurit 595

Отзывы:

Похожие инструкции для Eurit 595

Бренды по названию

Популярные бренды

Swissvoice Eurit 595, Руководство пользователя

Результаты поиска

Содержание Eurit 595

Отзывы:

Похожие инструкции для Eurit 595

Бренды по названию

Популярные бренды