Suzuki Intruder VZR1800, Руководство по обслуживанию

Страница: 237 / 586

FI SYSTEM DIAGNOSIS 5-43
Step 1 (When indicating P0120-L:)
1) Turn the ignition switch OFF.
2) Remove the fuel tank. (
#
6-3)
3) Check the TP sensor coupler for loose or poor contacts.
If OK, then check the TP sensor lead wire continuity.
4) Disconnect the TP sensor coupler.
5) Check the continuity between P/B wire
A
and ground.
6) Also, check the continuity between P/B wire
A
and B/Br wire
C
. If the sound is not heard from the tester, the circuit condi-
tion is OK.
7) Disconnect the ECM coupler. (
#
5-37)
8) Check the continuity between P/B wire
A
and terminal
8
.
9) Also, check the continuity between Red wire
B
and terminal
A
.
"
$
TPS lead wire continuity: Continuity (
(
)
!
09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
)
Tester knob indication: Continuity test (
(
)
Is the continuity OK?
10)After repairing the trouble, clear the DTC using SDS tool.
(
#
5-26)
1
1
]
When using the multi-circuit tester, do not strongly
touch the terminal of the ECM coupler with a needle
pointed tester probe to prevent the terminal damage
or terminal bend.
YES Go to Step 1 (
#
5-41) and go to Step 2.
NO
Red wire or P/B wire open, or P/B wire shorted to
ground
ECM coupler (Harness side)
(Black)
(Gray)
1
]