manualshive.com logo in svg

Suzuki DF115A, Руководство пользователя

Поделиться
Скачать
Suzuki DF115A Скачать руководство пользователя страница 21

21

NOTE:
When performing the passcode input operation
again after the operation has been cancelled
due to passcode input failure or after having
interrupted the operation; 
1) Install the emergency switch lock plate.
2) Turn the main switch to the “ON & OFF”

(“

”) position and then release it to the

“PUSH START/STOP” position.

3) Perform the procedure described above

from Step 5. 

(5) After the buzzer has sounded once, the key-

fob LED will blink the entered passcode.

(6) Install the lock plate on the emergency stop

switch.

(7) Turn the main switch to the “ON & OFF”

(“

”) position and then release it to the

“PUSH START/STOP” position to turn the
Keyless Start System OFF.
After that, do not perform any operation for
at least 30 seconds, while the system per-
forms passcode update.

ON & OFF

ON & OFF

ON & OFF

PUSH
START

STOP

PUSH
START

STOP

Hold it for five (5) seconds. 

* If equipped with top mount type 
  remote control box: (Main switch panel) 
  “ON & OFF”        “     ” 

Example: In the case of passcode 1234

Number of key-fob blinks

LED

PASSCODE CONFIRMATION

1. Confirm that the engine is stopped. 
2. Make sure the emergency switch lock plate

is in place.

3. Confirm the key-fob is within the communi-

cation range of the Keyless Start System. 

4. Confirm the key-fob is in ON mode. (Refer to

“Switching the communication mode of the
key-fob” section.)

5. Turn the main switch to the “ON & OFF”

(“

”) position and then release it. The main

switch automatically returns to the “PUSH
START/STOP” position. 
The buzzer on the engine control side emits
one (1) long sound while the buzzer on the
keyless control unit side emits two (2) short
sounds simultaneously. 

6. Within eight (8) seconds after performing

Step 5, start the following operation. 

(1) Turn the main switch to the “ON & OFF”

(“

”) position and hold it for five (5) sec-

onds or longer, then release it to the “PUSH
START/STOP” position.
Repeat this operation for two more times.

ON & OFF

ON & OFF

PUSH
START

STOP

PUSH
START

STOP

* If equipped with top mount type 
  remote control box: (Main switch panel) 
  “ON & OFF”        “     ” 

ON & OFF

ON & OFF

ON & OFF

PUSH
START

STOP

PUSH
START

STOP

Hold it for five (5) seconds. 

* If equipped with top mount type 
  remote control box: (Main switch panel) 
  “ON & OFF”        “     ” 

Содержание DF115A




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды