Supero SuperServer 1025C-M3, Руководство пользователя

Страница: 68 / 110

6-6
S
UPER
S
ERVER 1025C-M3 Manual
Figure 6-4. Removing a Hard Drive
1
2
DVD Drive Installation
The SC113M chassis includes a pre-installed DVD-ROM.
Installing or Replacing a DVD-ROM Drive (Figure 6-5)
Power down the system and if necessary, remove the server from the rack 1.
and the front bezel from the chassis.
Remove the chassis cover. 2.
Unplug the drives power and data cables from the serverboard and/or back- 3.
plane.
If you are adding a new drive: Remove the mini-bezel (grate) from the drive 4.
bay The bezel can be removed by pulling out the hard drive beneath the
DVD-ROM, then pulling the mini-bezel forward.
If you are replacing a drive: Locate the locking tab at the rear (left hand side
when viewed from the front) of the DVD-ROM drive. Push the tab toward the
drive and push the drive unit out the front of the chassis.
Insert the new drive unit in the slot until the tab locks in place. 5.
Reconnect the data and power cables. 6.
Replace the chassis cover (replace the server in the rack, if necessary) and 7.
power up the system.