Supermicro SUPERSERVER 6014A-8, Руководство пользователя

Страница: 30 / 130

3-2
S
UPER
S
ERVER 6014A-8 Manual
3-3 Control Panel LEDs
The control panel located on the front of th SC813S-500 chassis has five LEDs.
These LEDs provide you with critical information related to different parts of the
system. This section explains what each LED indicates when illuminated and
any corrective action you may need to take.
z
Overheat/Fan Fail: When this LED flashes it indicates a fan failure.
When on continuously (on and not flashing) it indicates an overheat condi-
tion, which may be caused by cables obstructing the airflow in the system
or the ambient room temperature being too warm. Check the routing of the
cables and make sure all fans are present and operating normally. You
should also check to make sure that the chassis covers are installed. Fi-
nally, verify that the heatsinks are installed properly (see Chapter 5). This
LED will remain flashing or on as long as the overheat condition exists.
z
NIC2: Indicates network activity on GLAN2 when flashing .
z
NIC1: Indicates network activity on GLAN1 when flashing.
z
HDD: Indicates IDE channel activity. On the SuperServer 6014A-8 this
light indicates SCSI and CD-ROM drive activity when flashing.
2
1