Supermicro SUPERSERVER 6014A-8, Руководство пользователя

Страница: 15 / 130

1-5
Chapter 1: Introduction
1-3 Server Chassis Features
The SC813S-500 is one of Supermicro's third-generation 1U chassis and
features four hot-swap SCSI hard drive bays, a slim CD-ROM drive, a slim
3.5" floppy drive and a revolutionary cooling design that can keep today's
most powerful processors running well below their temperature thresholds.
The following is a general outline of the main features of the SC813S-500
chassis.
System Power
When configured as a SuperServer 6014A-8, the SC813S-500 chassis in-
cludes a 500W cold-swap power supply.
SCSI Subsystem
The SCSI subsystem supports four 80-pin SCA Ultra320 SCSI hard drives.
(Any standard 1" drives are supported. SCA = Single Connection Attach-
ment.) The SCSI drives are connected to an SCA backplane that provides
power, bus termination and configuration settings. The SCSI drives are
also hot-swap units.
Control Panel
The SC813S-500 control panel provides important system monitoring and
control information. LEDs indicate power on, network activity, hard disk
drive activity and system overheat conditions. Also present are a main
power button and a system reset button.
I/O Backplane
The SC813S-500 is a 1U rackmount chassis. Its I/O backplane provides one
full-height full-length and one half-height half-length PCI slots, one COM port
(the other is internal), two USB ports, a VGA port, a SCSI port, PS/2 mouse
and keyboard ports and two Ethernet (LAN) ports.