Supermicro SUPERSERVER 6014A-8, Руководство пользователя

Страница: 50 / 130

5-14
S
UPER
S
ERVER 6014A-8 Manual
GLAN1/2 (Ethernet Ports)
Two gigabit Ethernet ports are lo-
c a t e d b e s i d e t h e V G A p o r t .
T h e s e p o r t s a c c e p t R J 4 5 t y p e
cables.
Power Button
The Power Button connection is
located on pins 1 and 2 of JF1.
Momentarily contacting both pins
will power on/off the system. This
button can also be configured to
function as a suspend button (see
s e t t i n g i n B I O S ) . T o t u r n o f f
power in suspend mode, depress
the button for at least 4 seconds.
Pin
Number
1
2
Definition
PW_ON
Ground
Power Button
Connector
Pin Definitions
(JF1)
Universal Serial Bus
(USB0/1)
Two USB 2.0 ports are located
b e s i d e t h e m o u s e a n d C O M 1
ports. USB0 is on the bottom and
USB1 is on the top. See the table
on the right for pin definitions.
Reset Button
The Reset Button connection is lo-
cated on pins 3 and 4 of JF1. Attach
it to the hardware reset switch on the
computer case. Refer to the table on
the right for pin definitions.
Chassis Intrusion
A Chassis Intrusion header is lo-
cated at JL1. Attach the appropri-
ate cable to inform you of a chas-
sis intrusion.
Pin
Number
3
4
Definition
Reset
Ground
Reset Pin
Definitions
(JF1)
Pin
Number
1
2
Definition
Intrusion Input
Ground
Chassis Intrusion
Pin Definitions (JL1)
Universal Serial Bus Pin Definitions
Pin
Number Definition
1 +5V
2 P0-
3 P0+
4 Ground
5 N/A
Pin
Number Definition
1 +5V
2 P0-
3 P0+
4 Ground
5 Key
USB0
USB1