Supermicro SUPERSERVER 6014A-8, Руководство пользователя

Страница: 56 / 130

5-20
S
UPER
S
ERVER 6014A-8 Manual
3rd Power Supply Alarm
Enable/Disable
The system can notify you in the
event of a power supply failure. This
feature assumes that three power
supply units are installed in the
c h a s s i s w i t h o n e a c t i n g a s a
backup. This setting should be
disabled on one and two power
supply unit systems with JP10 to
prevent false alarms. See the
table on right for pin definitions.
Jumper
Position
Open
Closed
Definition
Disabled
Enabled
Power Supply
Alarm Enable/Disable
Jumper Settings (JP10)
Power Force On Enable/
Disable
Jumper JPF allows you to enable or
disable the Power Force On function.
If enabled, the power will always stay
on automatically. If this function dis-
abled, the user needs to press the
power button to power on the system.
Jumper
Position
Open
Closed
Definition
Normal
Force On
Force Power On
(JPF)
Watch Dog Enable/Disable
JWD enables the Watch Dog func-
tion. Watch Dog is a system moni-
tor that can reboot the system when
a software application is "hung up".
Pins 1-2 will cause WD to reset the
system if an application is hung up.
P i n s 2 - 3 w i l l g e n e r a t e a n o n -
maskable interrupt signal for the ap-
plication that is hung up. See the
table on the right for jumper settings.
Watch Dog can also be enabled via
BIOS.
Note: When enabled, the user needs
to write their own application soft-
ware to disable the WD Timer.
Jumper
Position
Pins 1-2
Pins 2-3
Open
Definition
WD to Reset
WD to NMI
Disabled
Watch Dog
Jumper Settings (JWD)